Tags
There are no tags for this page.
Incoming Links
There are no pages that link to this page yet.
Attachments
Dobrica Pavlinušić's random unstructured stuff
NTP
Installing Stratum II NTP server on RaspberryPi using SiRF STAR III gps
Links
Raspbian installation
root@ntpi:/home/pi# systemctl start ssh
root@ntpi:/home/pi# systemctl enable ssh
pi@ntpi:~ $ grep pps /boot/config.txt
dtoverlay=pps-gpio,gpiopin=18
pi@ntpi:~ $ sudo apt-get install pps-tools
# reboot, after it:
pi@ntpi:~ $ dmesg | grep pps
[ 30.331047] pps_core: LinuxPPS API ver. 1 registered
[ 30.331066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 30.352868] pps pps0: new PPS source pps.-1
[ 30.352966] pps pps0: Registered IRQ 178 as PPS source
root@ntpi:~# systemctl disable systemd-timesyncd
root@ntpi:~# systemctl stop systemd-timesyncd
pi@ntpi:~ $ hcitool scan
Scanning ...
00:02:78:10:A2:32 SJ GPS
root@ntpi:/home/pi# ppstest /dev/pps0
trying PPS source "/dev/pps0"
found PPS source "/dev/pps0"
ok, found 1 source(s), now start fetching data...
time_pps_fetch() error -1 (Connection timed out)
time_pps_fetch() error -1 (Connection timed out)
time_pps_fetch() error -1 (Connection timed out)
fail, gps module is powered off without bluetooth connection
root@ntpi:/home/pi# grep rfcomm /etc/rc.local
rfcomm bind rfcomm0 00:02:78:10:A2:32
fix pps signal from this GPS and test again
root@ntpi:/home/pi# grep pps /boot/config.txt
dtoverlay=pps-gpio,gpiopin=18,assert_falling_edge
root@ntpi:/home/pi# ppstest /dev/pps0 | head
trying PPS source "/dev/pps0"
found PPS source "/dev/pps0"
ok, found 1 source(s), now start fetching data...
source 0 - assert 1516805100.156350675, sequence: 70193 - clear 0.000000000, sequence: 0
source 0 - assert 1516805100.176368675, sequence: 70195 - clear 0.000000000, sequence: 0
source 0 - assert 1516805100.196339675, sequence: 70196 - clear 0.000000000, sequence: 0
source 0 - assert 1516805100.216363675, sequence: 70198 - clear 0.000000000, sequence: 0
source 0 - assert 1516805100.236378675, sequence: 70200 - clear 0.000000000, sequence: 0
source 0 - assert 1516805100.256385675, sequence: 70202 - clear 0.000000000, sequence: 0
source 0 - assert 1516805100.276392675, sequence: 70204 - clear 0.000000000, sequence: 0
This doesn't work, we need one event per second
# make pin 18 pull-down
root@ntpi:/home/pi# raspi-gpio set 18 ip pd
root@ntpi:/home/pi# grep pps /boot/config.txt
dtoverlay=pps-gpio,gpiopin=18,assert_falling_edge
root@ntpi:/home/pi# ppstest /dev/pps0
trying PPS source "/dev/pps0"
found PPS source "/dev/pps0"
ok, found 1 source(s), now start fetching data...
source 0 - assert 1517323262.001232132, sequence: 697469 - clear 0.000000000, sequence: 0
source 0 - assert 1517323263.001229640, sequence: 697470 - clear 0.000000000, sequence: 0
source 0 - assert 1517323264.001227157, sequence: 697471 - clear 0.000000000, sequence: 0
source 0 - assert 1517323265.001224685, sequence: 697472 - clear 0.000000000, sequence: 0
source 0 - assert 1517323265.788526615, sequence: 697474 - clear 0.000000000, sequence: 0
source 0 - assert 1517323266.001222221, sequence: 697475 - clear 0.000000000, sequence: 0
# works!
gpsd
pi@ntpi:~ $ sudo apt-get install gpsd
ntp server
root@ntpi:/home/pi# apt-get install ntp
|