Tags
There are no tags for this page.
Incoming Links
There are no pages that link to this page yet.
Attachments
Dobrica Pavlinušić's random unstructured stuff
NSLU2
In my last visit to 24C3, I also got one of 99 EUR NSLU2 Slug devices.
unslug Linksys firmware
sudo apt-get install upslug2
existing firmware version
sudo upslug2 -t 00:1A:70:95:AD:6D -v
NSLU2 00:1a:70:95:ad:6d Product ID: 1 Protocol ID: 0 Firmware Version: R23VA5 [0x23A5]
flash
Flasing has great user interface:
sudo upslug2 -t 00:1A:70:95:AD:6D -i slugosbe-4.8-beta-nslu2.bin
Upgrading LKG95AD6D 00:1a:70:95:ad:6d
. original flash contents * packet timed out
! being erased - erased
u being upgraded U upgraded
v being verified V verified
Display:
<status> <address completed>+<bytes transmitted but not completed>
Status:
* timeout occured + sequence error detected
4605bf+000000 ...UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUu----------------------------
First flashing didn't end up quite well, since I got blinking green/amber led (even after power cycle). After that, I plugged 4Gb USB stick into port 2, re-flashed unit again, and it booted!
first login
Default password after flasing is: opeNSLUg
networking
Useful one-liner because I want to allocate default NSLU IP 192.168.1.77 to eth0 on which it is connected while rest of my network if same class 192.168.1.0/24 but on wifi.
ifconfig eth0 192.168.1.76 pointopoint 192.168.1.77 netmask 255.255.255.254 up
links
|